MaxTech V.42bis Network Card User Manual


 
19
permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be
installed using an acceptable method of connection. The
customer should be aware that compliance with the above
conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be made by an autho-
rized Canadian maintenance facility designated by the sup-
plier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the tele-
communications company cause to request the user to
disconnect the equipment.
Users should ensure for their own protection that the electri-
cal ground connections of the power utility, telephone lines
and internal metallic water pipe system, if present, are
connected together. This precaution may be particularly
important in rural areas.
Caution: Users should not attempt to make such connec-
tions themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
NOTICE: The Load Number (LN) assigned to each terminal
device denotes the percentage of the total load to be con-
nected to a telephone loop which is used by the device, to
prevent overloading. The termination on a loop may consist
of any combination of devices subject only to the requirement
that the sum of the Load Numbers of all the devices does not
exceed 100.
UL Notice
Caution: This internal modem adapter is to be installed in UL
Listed computers only, Always disconnect the modem adapter
from the telephone system during installation or when the
cover is removed from the computer.
First Edition GZ/DR - Version 1.0