Filter
Top Products
LD 500/500V User Manual
Description of OSD Functions
The following is a description of the different choices shown in the main OSD control menu.
Icon Function Function Description
Brightness
Increases or decreases the brightness of the screen image
Contrast
Increases or decreases the difference between dark and light color
Image
When “Image” is selected, a sub-menu with the following items will
appear:
H-pos
Adjusts the position of the screen image left or right.
V-pos
Adjusts the position of the screen image up or down.
Clock
Has a frequency tracking feature that offers the user better
screen image stability and clarity. The clock value can be
increased by up to +50. Decreases in the clock value
(minus) depends on the input timing.
Phase
A total of 32 scales (0 to 31) are available for adjusting
the focus and clarity of the display image.
Sharp
Specially designed for viewing pictures. A total of 10
scales are available for adjusting.
Text/Gfx
This function is to choose a display that allows
maximum text/graphics quality. The resolution can either
be 720 x 400 or 640 x 400
Exit
Exits the OSD controls.
Color
Provides three color adjustment options:
9300K
Sets the CIE coordinate color temperature to 9300K
6500K
Sets the CIE coordinate color temperature to 6500K
User
Adjusts the color temperature freely.
Auto Gain*
The auto gain is used to fine-tune the whites and light
grays to an even balance.
Language
Allows users to choose from among six languages for displaying text
in the OSD controls—English, French, Italian, German, Japanese and
Simplified Chinese.
Volume
Raises or lowers the volume of the built-in speaker.
Recall
Returns all adjusted parameters to factory preset values.
Input
Switch between D-Sub and DVI input (Optional)
Exit
Exits the OSD controls.
*Because of the differences in video signal output levels of graphics boards, disparities can be
seen in the color temperature and brightness of the images shown on the monitor, even when
the settings are the same. “Auto Gain” corrects irregular video signal output levels to
eliminate disparities in color temperature and brightness. This adjustment should be done
when a graphics board and monitor are connected. Please refer to the readme.txt file in the
Monitor Installation Disk.
- 12 -