Metra Electronics 99-7511S Computer Drive User Manual


 
99-7511S KIT ASSEMBLY
2
REAR OF RADIO HOUSING
FILLER TRIM PANEL
A
B
C
D
DIN RADIO PROVISION
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure B)
2
Attach the filler trim panel to the back
of the radio housing at the bottom
edge.
(Figure A)
1
Slide the aftermarket radio into the DIN
cage until it snaps into place.
(Figure C)
3
Snap the pocket into the the bottom
opening of the radio housing.
(Figure D)
4
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.