Filter
Top Products
58 CenturyStack 8100 Managed Hub
word displays as four asterisks. The current digit blinks, indicating it can
be configured.
1. Scroll to UNIT CONFIG and press <Enter>. You are
prompted to enter the password, **** PSW appears in the
message zone and the first “*” flashes. Press <Next> to
increase the digit.
2. Unlock the control panel by entering the default password
0000, one digit at a time by pressing <Next> once and
<Enter> once to progress to the next digit.
3. Repeat Step 2 three times. The control panel is unlocked.
4. Scroll to SET PASSWORD and press <Enter>.
5. Enter a new password and press Enter to exit the password
configuration, SET PASSWORD displays in the message
zone.
6. Press <Next> until MAIN MENU displays in the message
zone and <Enter> to exit to the main menu.
Password
Cancelling the Password
The password can be cancelled only by entering a new password or by
setting each digit to “*”.
In Case You Forget Your Password
If you forget your password, use the Console Management program to
read the password setting. See Chapter 4: “Connecting the Console
Interface” and “User Authentication” for more information.
ID
Master
WWW
SNMP
O-O-B
10
20
40
1
3
5
80
K%123456789101112131415G-A
G-B
G-C
G-D