19
INSTALLATION
CABLE INSTALLATION (INTERFACE SPECIFIC)
F
ULL SPEED USB
Step 8 is for USB Serial Emulation Mode or Keyboard Emulation Mode only.
8. Configure the StratosS for USB Serial Emulation Mode or USB Keyboard Emulation Mode by scanning the
appropriate configuration bar codes in the USB section of the MetroSelect Configuration Guide (MLPN 00-02407
x
)
under Low Speed USB. Any low speed USB warnings may be disregarded when utilizing these codes for a
Full Speed USB StratosS scanner.
Step 7 must be completed before continuing to step 8 for these features to work properly.
xx** Specifies international connection. See the Base Kit Components and
Optional Accessories section of this guide for a complete listing.
See power source caution statement on pages 8 or 11 of this manual.
Figure 20. USB Cable Installation Schematic