Filter
Top Products
44
DEFAULT SETTINGS
COMMUNICATION PARAMETERS
Many functions of the scanner can be "configured" - that is, enabled or disabled. The scanner is shipped from the factory pre-
configured to a set of default conditions. The default parameter of the scanner has an asterisk ( * ) in the charts on the
following pages. If an asterisk is not in the default column then the default setting is Off or Disabled. Every interface does not
support every parameter. If the interface supports a parameter listed in the charts on the following pages, a check mark will
appear.
PARAMETER DEFAULT OCIA RS232 RS485
S
USB
UPC/EAN
*
9 9 9 9
Code 128
*
9 9 9 9
Code 93
9 9 9 9
Codabar
9 9 9 9
Interleaved 2 of 5 (ITF)
9 9 9 9
MOD 10 Check on ITF
9 9 9 9
Code 11
9 9 9 9
Code 39
9 9 9 9
Full ASCII Code 39
9 9 9 9
MOD 43 CD on Code 39
9 9 9 9
Transmit Mode 43 CD
9 9 9 9
Paraff
9 9 9 9
Paraff Lead “A”
9 9 9 9
Allow Paraff Failures
9 9 9 9
French PC Terminal
9
MSI-Plessey
9 9 9 9
Airline (15 digit) 2 of 5
9 9 9 9
Airline (13 digit) 2 of 5
9 9 9 9
Matrix 2 of 5
9 9 9 9
Telepen
9 9 9 9
UK Plessey
9 9 9 9
STD 2 of 5
9 9 9 9
MSI-Plessey 10/10 Check Digit
9 9 9 9
MSI-Plessey MOD 10 Check Digit
9 9 9 9
ITF Symbol Lengths Variable
9 9 9 9
ITF Minimum Symbol Length 6
9 9 9 9
Symbol Length Lock None
9 9 9 9
Minimum Symbol Length 4
9 9 9 9
Trioptic
9 9 9 9
RSS14 Enable
9 9 9 9
RSS14 ID “]e0”
*
9 9 9 9
RSS14 App ID “01”
*
9 9 9 9
RSS14 Check Digit
*
9 9 9 9
S
Applicable for IBM
®
Host applications.