Metrologic Instruments MS2x20 Series Scanner User Manual


 
17
SCALE CONFIGURATION BAR CODES
Dual Cable Scale Configuration Bar Codes
Scale Protocols
The following bar codes will change scale parameters intended for a
Dual Cable environment. To place the scanner in Dual Cable mode,
please refer to page 24.
If the MS2xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the
changed configuration (see page 2).
Scale = Price
Compute Setup
³996047
Set the scale for price computing setup.
Price computing display
Dialog 06 Protocol
9600 Baud
Odd Parity
7 Data Bits, 1 Stop Bit