Filter
Top Products
7
INSTALLATION
GETTING STARTED
The OptimusR Portable Data Terminal (PDT) requires minimal effort to begin functional operation for data
collection in any application. In order to get started, the unit must have a fresh battery inserted into the battery
compartment.
1. Access the battery compartment by removing the battery cover. To remove the cover, pull the cover
release up on each side of the compartment and slide the cover away form the unit.
2. Insert the Li-ion battery into the battery compartment, battery information side up and battery contacts
to the bottom, at an angle with the battery contacts inserted first.
3. Push the Li-ion battery the remainder of the way into the compartment. The battery will fit snuggly into
place.
4. Close the battery compartment by sliding the battery cover toward the scan head until the cover locks
into place.
5. Turn the unit over, so the keypad is visible and hold down the power button .
6. The LCD graphical display will display a menu and an audible indicator will sound to signify that the
Optimus has been powered up properly.
7. Using the arrow keys select the Run Program option.
8. Scan a bar code.
Note: The OptimusR comes with a default program loaded that allows users to scan items and enter their quantity.
For information on how to create these programs, please refer to the Optimizer manual.