Micro Technic PV-1700 Power Supply User Manual


 
Users Manual & Installation Guide
PV- 1800: Power supply module with GSM MODEM
Page 19 / 21
Max input voltage 30V, current limiting resistor = 3.32kohm / 250mW
Counter input DI0 can act as a 16-bit up-counter by counting positive or
negative edges (configurable)
DI0 and DI1 can act as a 16-bit quadrature counter.
Max counting rate 10kHz
Connector type 10 pin box header
Digital outputs:
Number of channels 7 isolated PNP outputs
Max load current 0.5Adc, load current external delivered,
total current must not exceed 1.5Adc.
Max voltage 30Vdc
Protection Snubber diode at each output
Connector type 10 pin box header
Environmental specifications:
Operating temperature: -20º to +70ºC
Storage temperature: -40º to 85ºC
Humidity: 20 to 90% non-condensing
Cyclic humidity: ETS 300 019-2-5 or equal
Vibration: 10-1000 Hz Sinus and random @ 1-1,5G RMS
Sustained vibration: EN 60068-2-34 & EN 60068-2-36
Shock IEC 60068-2-27 & IEC 60068-2–29
Size (W x L x H) 90 x 96 x 14 mm – see next page
Weight: 116 g (excl. packaging)
*for details refer to SonyEricsson’s documentation:
GM47_48 Guidelines and
GM47_48 Integrators Manual