Filter
Top Products
9
TOTAL: 11/0
Pass: 11 Fail: 0
[01] USB 3858M
FAT32 3669M
Controller Buffer
Firmware Version
TOTAL: 11/0
Pass: 11 Fail: 0
Copy 3669M
10% 0:53 367M
Synchronous Duplication
If the entire source content cannot be stored in the memory buffer, Synchronous duplication
will be required.
Place your master card into the reader port and your blank
cards into the recorder ports.
Press the OK button on the controller interface. If all
recorder ports are filled, duplication will begin. If not, the display will show how many target
cards are in place; press OK again to begin duplication to the loaded target cards.
The data will now be copied to the blank cards.
When the job is completed, the green LED above the
recorder ports will show a steady green and the cards can
be removed.
When each Synchronous duplication cycle completes, you must replace all cards and press
the OK button to restart duplication.
Compare
The Compare function is used to compare the master card with the copied cards. Like Copy,
Compare can be performed Asynchronously or Synchronously.
Place your master card into the reader port and your copied cards into the recorder ports.
Press the OK button on the controller interface. The
duplicator will now compare the master and copied cards.
When completed, the display will read:
Copy & Compare
The Copy and Compare function will perform both operations, one after the other. If the Copy
portion passes without errors, the system will automatically start the Compare process. Like
Copy, Copy & Compare can be performed Asynchronously or Synchronously.
Place your master card into the reader port and your blank cards into the recorder ports. Press
the OK button on the controller interface.
The duplicator will first copy the master card to the blank cards.
When the Copy completes, the unit will start the Compare process. If Asynchronous duplication
is being performed, the LED will blink quickly above each card as the Copy phase is in progress.
During the Compare phase, the LED will blink slowly.
When the job is completed, the totals will be provided.
Information
The Information function displays information on each card placed in the card ports as well as the
System Information.
Card Info
Press the OK button and the card in the reader port is
analyzed before the information is displayed. The top line
indicates the port, the type of card, and the total capacity
of the card. The second line indicates the format and the
used capacity of the card. Press the ▼▲ buttons to access each card port.
System Info
Press the OK button to view the Controller model, the
Buffer size, and the Firmware version of the duplicator.