Filter
Top Products
19
Power Button
To turn the system on or off, press and hold the power button for 1-2
seconds. When you turn the power on, the speaker beeps once (if sound is
enabled).
The Power Button will not work when the system is in suspend mode or
when the computer is being powered by battery only and the display panel
is closed. See Chapter 3, Battery and Power Management.
Reset Switch
Warning!
When the system is rebooted all information in random access memory (RAM) is lost.
The reset switch to the right of the floppy drive reboots the system. Insert
the tip of a ball-point pen into the opening to press the switch.
PCMCIA Card Eject Buttons
These buttons let you insert or remove PCMCIA cards in the PCMCIA
slots.
Note: PCMCIA cards can be removed and replaced while the system is on
Chapter 2 - The Big Picture