Filter
Top Products
63
Keyboard Numlock
Specifies whether Num Lock is on or off at system bootup.
Options: Enabled or disabled.
Keyboard Repeat
Determines how fast a character repeats when a key is held down. Also
specifies the amount of time that will pass after a key is depressed before
repeating begins.
Options: 2, 6, 10, 15, 20, and 30 cps. Key delay selections: 1/4, 1/2, 3/4,
and 1 sec.
Internal Mouse
Enables or disables the internal (TruePoint) pointing device. When dis-
abled, the external mouse port is activated.
Left-Handed Mouse
Switches the functions of the left and right mouse buttons.
Note: If you switch mouse buttons, you’ll have to use the opposite buttons to return to
normal.
Sound Chip
Enables or disables the onboard sound chip. Disable this chip if you use an
external sound card.
Note: This sound system works automatically with Windows, but when installing DOS
games or applications that use DOS Sound Blaster your software must use the
following three hardware settings: I/O Address = 220, IRQ = 5, DMA = 1.
Chapter 5 - Using SETUP
MERID850.PM5 6/6/95, 5:03 PM63