Filter
Top Products
into the electrical receptacle. Now you will see the LED of Port 1 lights
up, and hear a beep sound.
y Recommended Power On sequence: Monitor, KVM then PC.
2.6 Daisy Chain Connection
Connecting multiple KVM together, please use a daisy chain cable (sold
separately) to connect via the Daisy Chain port and Local Console’s VGA port.
Use one end of daisy chain cable to connect to the Daisy Chain port of
Master KVM switch and connect the other end of daisy chain cable to the
Local Console port of the next Slave KVM switch. Please repeat the
connection procedures for next Slave KVM switch. Users can daisy chain up
to eight banks in maximum.
The console OSD menu will show only the port information of the master
KVM switch. When the master unit starts up, it will query all daisy chained
Slave units, and automatically set up the Bank ID for each Slave unit. So the
7-seg LED on the Master unit will display 1, Slave 1 will display 2, Slave 2 will
display 3, and so on. If not so, please reset (press “BANK” and port button)
the Master unit to update the Bank ID immediately. Hot Plug function is
supported in daisy chain connection. The Master unit will auto-query the daisy
chained Slaves every 30 seconds.
8