Filter
Top Products
Step 3: Broadband Type
In this section users have to select one of four types of connections that it will be using
to connect to broadband router WAN port to the ISP (see screen below). Different ISPs
require different methods of connecting to the Internet, please check with the ISP as to
the type of connection it requires.
Parameter Description
Dynamic IP Address ISP will automatically provide an IP address.
Static IP Address ISP has given users an IP address already.
PPPoE/PPPoA
PPPoE (PPP over Ethernet) and PPPoA (PPP over ATM) are
common connection methods used for xDSL.
Bridge Mode
Device will act as modem only equipment to prevent conflict
with other routers.
Click on one of the WAN type and then proceed to the manual’s relevant sub-section.
Click on <Back> to return to the previous screen.
19