Filter
Top Products
28
3.2.9 WPS Configuration
Wi-Fi Protected Setup (WPS) is the latest wireless network technology, which
makes wireless network setup become very simple. The user doesn’t have to
configure the wireless access point and setup data encryption when devices
support WPS.
This wireless network card is compatible with WPS. To use this function, the
wireless access point must also support WPS function. Please follow the
following instructions to establish secure connection between WPS-enabled
devices.
WPS Setup - PBC (Push-Button Configuration)
Step 1. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on the
wireless access point (the button used to activate WPS standby mode may
have another name), or use other way to start WPS PBC standby mode as the
instruction given by the wireless access point’s user manual. User can also set
‘Config Mode’ to ‘Registrar’. In this mode, the wireless network card will wait for
other WPS-enabled access points to send WPS pairing requests. Please refer
to the instruction given by the wireless access point’s user manual to
understand how to send WPS requests.
Step 2. Before users start to establish the wireless connection by using WPS,
click ‘Rescan’ button to search for WPS-enabled access points and make sure
the WPS function of the access point is activated.