Microsoft E800 Server User Manual


 
Manual Installation
Creating the Drivers Diskette
Before you begin, use one of the following two methods that can be used to create the drivers
diskette. One method is to create the drivers diskette using a system booted from the Navigator
CD. The other method is to create the drivers diskette using a system that is running Windows
NT, Small Business Server 2000, or Windows 95/98.
Creating the Drivers Diskette at the server after booting from the Navigator CD
1. Boot the system from the Navigator CD.
2. From the "NetServer Navigator Select a NOS" screen, select the operating system that you
will be installing. Then, select "Continue".
3. From the "Diskette Title" window, select the diskette that you want to create and then select
"Create Diskette(s)". Follow the on-screen instructions to create the desired diskette(s).
Create the Drivers Diskette using a system running Windows NT, Small Business Server
2000, or Windows 95/98
1. Insert the Navigator CD in the CD-ROM drive on the Windows-based system.
NOTE: The system's monitor must be set for at least 800 x 600 resolution.
2. Your system should auto-detect the presence of the CD and start the Navigator process. If
your system does not auto-start the Navigator process, start it by executing LAUNCH32.EXE
which can be found at the root level of the Navigator CD.
3. Once the Navigator process has started, select the target HP NetServer system from the drop-
down menu and select "Continue".
4. From the "NetServer Navigator Select a NOS" screen, select the operating system that you
will be installing. Then, select "Continue".
5. At the "NetServer Navigator Main Menu" screen, select "Diskette Library".
6. From the "Diskette Title" window, select the diskette that you want to create and then select
"Create Diskette(s)". Follow the on-screen instructions to create the desired diskette(s).
Selecting the Manual Installation Method
Before using this method of installation, decide whether you want to install Small Business
Server 2000 using Setup Diskettes, or by booting directly from the Small Business Server 2000
CD.
· If you wish to create Setup Diskettes (perhaps because you have other systems that do not
support booting from CD), proceed to the following section "Creating Setup Diskettes."