Filter
Top Products
HP nVIDIA GeForce2 MX (32 MB) Graphics Card Installation Guide
Overview of the Installation Procedure
8 English
Installing the New Driver Software
NOTE For Windows NT 4.0 users only.
Once the driver is installed you should reboot your computer.
If your computer has a Pentium III processor and Windows NT 4.0
you are using Service Pack 4 or earlier you should install the Intel
SIMD driver available on the software CD-ROM.
Ensure that the Plug-and-Play Operating System setting of the
BIOS is disabled before installation.
Windows 98
1
Start the computer. Windows 98 automatically detects the new
graphics card.
2 In the Add New Hardware Wizard window, you will be prompted to
install a driver for your graphics card, click Next.
3 Click Next and insert the software CD-ROM disk in your drive.
4 Select Specify a Location, then click Browse.
5
Go to the
win98
folder on the software CD-ROM and click OK.
6 Click OK in the Specify a Location window then click Next.
7
Click Next then click Finish.
8 Select Yes to restart your computer.
Windows NT4.0 (SP4+)
1
Start the computer.
2 Insert the software CD-ROM disk in your drive.
3 In the Windows Explorer, go to the winNT folder on the software
CD-ROM.
4 Select the setup.exe file and click OK.
5 Click Next.
6
Select nVIDIA GeForce2 MX and click OK.
7 Click Finish to restart your computer.