Filter
Top Products
Computer Name: ______________________
Admin Password: _____________________
Date Time Zone: ______________________
Workgroup or Domain Name: ______________
Registration Key: ____________________________
Installation Methods
There are several ways of installing Small Business Server 2000. The most popular methods are
listed below. Select a method and go to the appropriate section of this guide to begin. Depending
upon your system and its configuration, it may also be necessary to create a drivers diskette.
1. Automatic Installation – boot from the HP Navigator CD and run the
Configuration/Installation utility. (Supported on all HP NetServer systems.)
2. Manual Installation – do the following:
· Create the HP NetServer Small Business Server 2000 drivers diskettes using the HP
NetServer Navigator CD-ROM.
· Select one of the following methods for installation:
- Create Small Business Server 2000 Setup diskettes. Use those diskettes to begin the
installation. Insert and use the Small Business Server 2000 CD when prompted.
Or
- Boot directly from the Small Business Server 2000 CD to begin the installation.
Automatic Installation – Using the HP Navigator CD
HP recommends that you follow this method to install Small Business Server 2000. This is the
easiest method because it requires less user intervention. Following are the steps to complete the
installation of Small Business Server 2000 using the HP Navigator CD.
1. Boot the system from the HP Navigator CD.
2. From the "NetServer Navigator Select a NOS" screen, select the operating system that you
will be installing. Then, select "Continue".
3. At the main menu, select "Configure the Server".
4. Then select "Guided Setup" and follow the instructions on the screen.