Filter
Top Products
47
7. Troubleshooting
7-1.General Hardware Troubleshooting
T Make sure the FR1SX’s power LED comes on. If the LED does not come on,
your SCSI device may not provide SCSI bus termination power. If the
SCSI device can not provide it, an OPTIONAL AC adapter is required.
For purchasing information, refer to Chapter 8.
T Make sure the FR1SX is firmly connected to your SCSI device.
T Make sure the 1394 cable is firmly connected to the FR1SX and a 1394 port
on your PC or Mac.
T Make sure you are using the 1394 cable bundled in this package.
T Make sure the SCSI device has a proper SCSI ID. (Must be 0-6)
T Make sure the SCSI device is powered.
T Make sure a terminator is attached to the SCSI device.