Milan Technology MIL-S501SC-40 Switch User Manual


 
11
n RJ-45 Ports: Five 10/100 N-Way auto-sensing for 10Base-T
or 100Baes-TX connections.
n Uplink Port: One uplink port to cascade to a hub or switch,
with the maximum distance between the switch to another
device is 100 meters.
n 100Base-FX Fiber Port: There are 5 types of fiber
connectors available for the MIL-S501xx as shown above.
The distance for fiber cabling can be extended up to 2
kilometers for multi-mode fiber and up to 70 kilometers for
single-mode fiber.
n DIPswitch: the DIPswitch is to select Full duplex or Hall-
duplex mode for the fiber port.
n DC Power Connector: Plug DC Power Adapter’s female end
into this device, and the male end of DC Power Adapter into
an AC outlet. The Adapter supplies 5VDC at 2.5 Amps to the
Switch.