Milan Technology MIL-S501SC-40 Switch User Manual


 
15
n Cabling
A. RJ-45 ports: Use unshielded twisted-pair (UTP) or shield
twisted-pair (STP) cable for RJ-45 connections: Category3, 4
or 5 cable for 10Mbps connections or Category 5 cable for
100Mbps connections. Also be sure that the length of any
twisted-pair connection does not exceed 100 meters (328
feet).
B. 100Base-FX fiber port: Fiber multi-mode connector type
must use 62.5/125 um multi-mode fiber cable. You can
connect two devices over a 2-kilometer distance. [Fiber
single-mode connector type must use 9/125 um single- mode
fiber cable. You can connect two devices over a 70- kilometer
distance in full duplex operation. ]