Milan Technology MIL-SME801GSX Switch User Manual


 
35
4-3-5-1. VLAN Configure
Choose a VLAN
In the VLAN Configure menu select the type of VLAN you want to configure:
VLAN Disabled (default), Port Based VLAN, or IRRR802.1Q Tag based
VLAN. Save the configuration.
There are 3 different options for VLANs to
choose from using the space bar: Disabled, Port Based and 802.1Q.
To configure a new VLAN, select
Edit
and then use the tab key to select
items you want to configure. The space bar allows you to select the different
options.
After adding a VLAN group, the configuration option
Edit a VLAN Group
will
allow you to change the membership by adding or deleting ports.
Port Based VLANs
These VLANs only apply to this switch. The VLANs can be overlapping,
meaning that any port can belong to more than one VLAN. One
configuration that is common for port based VLANs is to have all the ports on
the switch on separate VLANs except for the port that has the server
connected. The port connected to the server belongs to all the VLANs.
This enables security between ports but allows all ports access to the server.
Up to 256 different port based VLANs may be configured.