Filter
Top Products
Figure 5-4. Port Setup
If you want to modify the port status, you must use the “m” key to select
the port that you want to change status. After selecting the port, press
“space bar” to change the port status, which has two modes, Enabled or
Disabled. After all the port settings are correct, press “S” to save the port
status parameters. The "Esc" key returns you to back to the main menu.
SPEED/Duplex Setup
There are six different operating modes for the Ethernet ports: Auto/Flow
Control enabled, Auto/Flow control disabled, 100Base-TX/Full Duplex,
100Base-Tx/Half Duplex, 10Base-T/Full Duplex, 10Base-T/Half Duplex.
The default for all ports is Auto/Flow Control enabled. If you want to
change the mode of the port, use the "m" key to select the port and then
press the “SPACE” bar to scroll the options until the correct link mode
appears. After all ports have the correct settings, press the “S” key to
save the parameters. The "Esc" key returns you to the main menu.
19