Filter
Top Products
Rack-mounted Installation
A rack-mounting kit is provided with the MIL-S1600 and the switch can be
mounted in an EIA standard size 19-inch rack allowing it to be placed in a
wiring closet.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the switch and
secure it with the smaller bracket screws. Then attach the remaining
bracket to the other side of the switch.
Figure 2-5. Attach mounting brackets with screws
B. After attaching both mounting brackets, position the MIL-S1600 in the rack
by lining up the holes in the brackets with the appropriate holes on the
rack. Secure the switch to the rack using rack-mounting screws.
7