Filter
Top Products
21
4-3-2. Port / Trunk Configuration
This page can change every port status and configure trunk groups.
Press TAB key to change the configuration of each item.
1. Enabled: User can disable or enable the port. Port 9 is always enabled.
2. Auto Negotiate: Ports 1 to 8 (100Mbps Fiber) are disabled, Port 9 (GBIC
port) is enabled.
3. Speed/Duplex Config: Ports 1 to 8 (100 Mbps Fiber port) can be set for
full-duplex or half-duplex mode. Port 9 (GBIC port) is fixed at 1000Mbps
full-duplex mode.
4. Flow Control: User can set flow control function to be on or off for ports
1 to 8. Flow control for Port 9 (GBIC port) is fixed at enabled (on).
5. Group: User can set trunk groups for ports 1 to 8. There are four possible
trunk groups. Port 9 is not available for trunk groups.
Actions->
<Quit>: Exits the port configuration page and returns to previous menu.
<Edit>: Configures all items. When finished, pressing ESC returns to the
action menu line.
<Save>: Saves all configured values.