Filter
Top Products
38
4-4-1-2.System Configuration
Spanning tree information for the Root Bridge on the left is for display only.
Configure new values for the STP parameter on the right.
You must enable STP function before selecting the configuration menu.
Priority:
The value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. Enter a
number 1 through 65535.
Max Age: The number of seconds a bridge waits without receiving
Spanning-Tree Protocol configuration messages before attempting a
reconfiguration. Enter a number 6 through 40.
Hello Time: The number of seconds between the transmission of Spanning-
Tree Protocol configuration messages. Enter a number 1 through 10.
Forward Delay Time: The number of seconds a port waits before changing
from its Spanning-Tree Protocol learning and listening states to the
forwarding state. Enter a number 4 through 30.