Filter
Top Products
5
5.3 Changing Default Settings
5-22 Di2010/Di2510/Di3010/Di3510
Utility Mode Operations Chapter 5
To set the “Default Copy Output Levels” function
This specifies the auto and manual default printing density level settings.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [4/6], and then touch
[Default Copy Output Levels].
4 Select the desired settings, and
then touch [Enter].
❍ The default Auto density level
can be set to [Lighter],
[Normal] or [Darker].
❍ The default Manual density
level can be adjusted by one
level at a time.
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.