Filter
Top Products
24
Chapter Six: Power Monitoring Software Installation Guide
6.1. Hardware Installation
1. With the UPS off, connect one end of the RS232 cable to the UPS.
2. Connect the other end of the RS232 cable to the equipment that is
monitoring the UPS. If there is only a DB25 connector on the monitoring
equipment available, you may use a DB9 to DB25 adapter.
3. Turn the UPS and the monitoring equipment on.
6.2. Software Installation
6.2.1. RUPS II Installation
A. RUPS II for MS-DOS
1. Insert the software CD into your CD drive and execute INSTALL.EXE
under MS-DOS.
A:\>CD\DOS<Enter>
A:\DOS>INSTALL<Enter>
2. Please select the MS-DOS menu from the installation menu box, and give
the path of RUPS II software CD and the designated directory of it. (You
may use the default value of RUPS II)
3. The installation program will copy all required files of the RUPS II into the
designated path. It will also append a Load RUPS.EXE command in
your AUTOEXEC.BAT file automatically. After the installation is done,
the installation program will execute the CONFIG.EXE automatically.
You may modify the configurations of RUPS II now.
B. RUPS II for Windows 3.1, Windows 95, 98, Windows NT
1. Execute "A:\Windows\setup.exe" under Windows system. This
procedure can be achieved either by file manager or from the "RUN"
command of Windows.
2. The RUPS II Setup group is labeled as RUPS2W, you may reset it to the
desired group you wish.
25
C. RUPS II for Novell Netware
1. Login the File Server as a SUPERVISOR or a USER with access rights
in sub-directory SYS: SYSTEM.
F:\>LOGIN SUPERVISOR
2. Insert the software CD into the CD drive and execute INSTALL.EXE.
F:\>A:
A:\>INSTALL
3. After the installation is complete, please shutdown your NetWare
Operating System and restart it. The system will load the
PowerMan.NLM and execute it.
4. When the RUPS II for NetWare is loaded, the Filer Server will broadcast
a successful loading message on the screen. You may switch to the
RUPS II Menu by pressing ALT_ESC simultaneously.
6.2.2. UPSilon 2000 Installation
A. UPSilon 2000 for Windows 95, 98, NT
1. From the Start Button, choose "Run".
2. Type D:\Windows\Setup.exe.
3. Choose OK.
B. UPSilon 2000 for Novell Netware V3.1x
1. Login the File Server (with access rights in SYS: SYSTEM).
2. Execute D:\Netware\V3.1x\Install.exe.
3. Reboot System.
C. UPSilon 2000 for Novell Netware V4.x
1. Login the File Server (with access rights in SYS: SYSTEM).
2. Execute D:\Netware\V4.x\Install.exe.
3. Reboot System.
D. UPSilon 2000 for Novell Netware V5.x
1. Login the File Server (with access rights in SYS: SYSTEM).
2. Execute D:\Netware\V5.x\Install.exe.
3. Reboot System.