Filter
Top Products
Installation
Mitsubishi Electric, MA00816 7
2 Installation
2.1 Space Requirements
– Installation plate thickness: 1.5 - 7.5 mm (0.06 - 0.3 inch)
– Space requirements when installing the operator terminal:
Caution
The openings on the enclosure are for air convection. Do not cover these
openings.
2.2 Installation Process
1. Unpack and check the delivery. If damage is found, notify the supplier.
Note:
Place the operator terminal on a stable surface during installation.
Dropping it or letting it fall may cause damage.
2. Place the panel cut out where the operator terminal is to be situated, draw along
the outer sides of the holes and cut according to the markings. If access to the
text strips is needed, add extra space at the left side.
187 mm
56.9 mm
100 mm
(4.0 inch)
50 mm
(2.0 inch)
50 mm
(2.0 inch)
100 mm
(4.0 inch)
(7.36 inch)
202 mm
100 mm
(4.0 inch)
(7.95 inch)
(2.24 inch)
x4
Panel cut out 166 x 149 mm
(6.54 x 5.87 inch)
For text strip
7.0 mm
14.0 mm
(0.55 inch)
(0.28 inch)