Filter
Top Products
EN-8
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected image. See "Fine-
tuning the image size and clarity" on page 23 for details.
2. Zoom ring
Adjusts the size of the image. See "Fine-tuning the
image size and clarity" on page 23 for details.
3. POWER indicator light
Lights up or flashes when the projector is under
operation. See "Indicators" on page 44 for details.
4. SOURCE
Displays the source selection bar. See "Switching input
signal" on page 22 for details.
5. Left/BLANK
Used to hide the screen picture. See "Hiding the image"
on page 30 for details.
6. MODE/ENTER
Selects an available picture setup mode. See "Selecting a
picture mode" on page 26 for details.
Enacts the selected On-Screen Display (OSD) menu
item.
7. MENU/EXIT
Turns on the On-Screen Display (OSD) menu. Goes
back to previous OSD menu, exits and saves menu
settings. See "Using the menus" on page 20 for details.
8. TEMPerature indicator light
Lights up red if the projector's temperature becomes too
high. See "Indicators" on page 44 for details.
9. LAMP indicator light
Indicates the status of the lamp. Lights up or flashes
when the lamp has developed a problem. See
"Indicators" on page 44 for details.
10. AUTO
Automatically determines the best picture timings for the
displayed image. See "Auto-adjusting the image" on
page 23 for details.
11. Keystone/Arrow keys ( / Up, / Down)
Manually corrects distorted images resulting from an
angled projection. See "Correcting keystone" on page 24
for details.
12. Right/
Activates panel key lock. See "Locking control keys" on
page 30 for details.
When the On-Screen Display (OSD) menu is activated,
the #5, #11, and #12 keys are used as directional arrows
to select the desired menu items and to make
adjustments. See "Using the menus" on page 20 for
details.
13. POWER
Toggles the projector between standby mode and on. See
"Starting up the projector" on page 19 and "Shutting
down the projector" on page 31 for details.
4
5
6
7
1
2
9
10
11
12
13
8
3
11
I
I