Mitsubishi Electronics HC3000 Projector User Manual


 
EN-9
ENGLISH
30°30°
30°30°
Using the remote control
20°
10°
20°
10°
20˚
20˚
Operational range of the remote control
Keep the remote control photo-sensor out of direct
sunlight or fl uorescent lamp light.
Keep the remote control photo-sensor at least 2 m
(6 foot) away from fl uorescent lamps. Otherwise,
the remote control may malfunction.
If there is an inverter-operated fl uorescent lamp
near the remote control, the remote control opera-
tion may become unstable.
When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
Reception angle
Vertical directions
Vertical directions (ceiling mount)
Front of projector
Rear of projector
Operate the remote
control within a distance
of 10 m (30 foot) from the
projector, pointing the
IR beam at the remote
control photo-sensor
(front or rear) of the
projector.
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (6 foot). The operable range of the
remote control, however, depends on the characteristics
of the screen.