Filter
Top Products
4
ASCII HEX
Function
Data (Receive)
Function
Data (Receive)
POWER ON vP 1 76h 50h 31h
POWER OFF vP 0 76h 50h 30h
INPUT COMPUTER vI r1 76h 49h 72h 31h
INPUT COMPONENT vI c1 76h 49h 63h 31h
INPUT DVI vI d2 76h 49h 64h 32h
INPUT VIDEO 1 vI v1 76h 49h 76h 31h
INPUT VIDEO 2 vI v2 76h 49h 76h 32h
POWER ON/OFF INPOSSIBLE vPK 0 76h 50h 4Bh 30h
POWER ON/OFF POSSIBLE vPK 1 76h 50h 4Bh 31h
NO SIGNAL SUPPLIED vSM 0 76h 53h 4Dh 30h
SIGNAL SUPPLIED vSM 1 76h 53h 4Dh 31h
10)
Menu setting commands (Not executable in stand-by mode. Possible only to read during muting.)
The menu setting commands are used for the menu setting of this projector. If the personal computer sends the
command without attaching the data code, the projector attaches to the received command it’s current setting
value as the data code and send it back to the PC.
ITEM ASCII HEX VALUE
CONTRAST
*1
P 50h +60+60+60 (R from G+Main data+B from G)
BRIGHTNESS
*1
Q 51h ±30±30±30 (R from G+Main data+B from G)
CineRichColor WEH 57h 45h 48h 00 - 10 , 11 (AUTO)
sRGB SRGB 53h 52h 47h 42h 0 (OFF), 1 (ON)
COLOR TEMP. A 41h 1 (9300K), 2 (6500K), 3 (5900K), 4 (USER)
COLOR T 54h +00 - +20
TINT S 53h ±10
SHARPNESS R 52h +00 - +20
GAMMA MODE GS 47h 53h
0 (STANDARD), 1 (THEATER1), 2 (THEATER2), 3 (AUTO)
AUTO POWER ON APON 41h 50h 4Fh 4Eh 0 (OFF), 1 (ON)
AUTO POWER OFF APOF 41h 50h 4Fh 46h 00 (OFF) , 05, 10, 15, 30, 60
SPLASH SCREEN SS 53h 53h 0 (OFF), 1 (ON)
BACK COLOR BB 42h 42h 0 (BLACK), 1 (BLUE)
LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW)
IMAGE REVERSE IR 49h 52h
0 (OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR, INVERT)
MENU POSITION MP 4Dh 50h 0 (Upper left), 1 (Lower right)
CINEMA MODE CINE 43h 49h 4Eh 45h 0 (OFF), 1 (AUTO)
VIDEO SIGNAL VS 56h 53h 0 (AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,
4 (4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
ASPECT SC 53h 43h 0 (AUTO), 1 (4:3), 2 (16:9), 3 (EXPAND), 4 (REAL)
LANGUAGE LG 4Ch 47h
0 ( ), 1 (English), 2 (Español), 3 (Deutsch) , 4 (Français),
5 (Italiano),6 ( ), 7 ( ), 8 ( ), 9( )
RESET ALL
RSTALL
52h 53h 54h 41h 4Ch 4Ch
HORIZ.POSITION HP 48h 50h +:increment, -:decrement
*2
VERT.POSITION VP 56h 50h +:increment, -:decrement
*2
FINE SYNC. FN 46h 4Eh 00 - 31
TRACKING TRK 54h 52h 4Bh +:increment, -:decrement
*2
COMPUTER INPUT CIN 43h 49h 4Eh 0 (RGB), 1 (YCBCR/YPBPR)
SET UP STU 53h 54h 55h 1 (OFF), 2 (3.5%), 3 (7.5%)
HOLD HLD 48h 4Ch 44h 0 (OFF), 1 (ON)
HOLD BEGIN HLB 48h 4Ch 42h 00 - 15
HOLD END HLE 48h 4Ch 45h 00 - 15
CLAMP POSITION CLP 43h 4Ch 50h 00 - 63
CLAMP WIDTH CLW 43h 4Ch 57h 01 - 63
LPF LPF 4Ch 50h 46h 0 (OFF), 1 (ON)
Sending commands Status code from Description
from the PC, etc. the projector
30 30 76 49 0D Command for checking the input terminal
'0' '0' 'v' 'I' '
'
30 30 76 49 76 31 0D Check result ( VIDEO 1)
'0' '0' 'v' 'I' 'v' '1' '
'
The PC sends the command without attaching the data code to it. On the other hand, the projector attaches
to the received command it’s current operating status as the data code and send it back to the PC.
[Example ] When checking the currently selected input terminal (when the INPUT VIDEO 1 is being selected) :
9
) Reading command diagram
The projectors operating status, such as POWER-ON / OFF and the currently selected input terminal, etc. can
be monitored.
*1) When sRGB is ON, only the main data are effective.
*2) Setting range differs depending on the input signals.
• Some commands are not executed depending on the input signal. The operational restrictions same as
those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.