Filter
Top Products
English-11
English
Hole of stand
Claw of
Monitor
Stand
Screw M5 x 40
How to install stand
1. Please turn monitor off.
2. Insert claws of monitor to stand holes until clicks.
3. Fasten 2 screws (M5 x 40) of both side.
Torque 280 ~ 300N cm
How to remove the stand
1. Spread the protective sheet on the flat surface, such as a desk.
2. Place monitor on the protective sheet.
3. Remove 2 screws of each stand with a screw driver and keep them for reuse.