Filter
Top Products
EN - 17
ENGLISH
3 FEATURE
MENU POSITION ...................Use to select the position of the menu on the
screen, 1.
(upper left) or 2. (lower right).
CINEMA MODE ......................When AUTO is selected, the fi lm mode will be
automatically activated when a fi lm source signal
is inputted. When OFF is selected, the fi lm mode
will not be activated.
VIDEO SIGNAL .......................When AUTO is selected, the appropriate video
format is automatically selected depending on the
input signal. If the image isn't displayed correctly,
select the desired video format manually.
ANAMORPHIC .......................Select ON when playing DVD discs containing data of widescreen images.
PASSWORD FUNCTION ........Use to change the mode of the password lock or to enable or cancel the password
lock. See page 21 for details.
LANGUAGE ............................Use to select the language used in the menu. (
/ English / Español / Deutsch /
Français / Italiano /
/ / / PORTUGUÊS).
RESET ALL .............................Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.
• When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of
VIDEO SIGNAL depending on the input signal in such cases.
4 SIGNAL
HORIZ. POSITION ..................Use to adjust the horizontal position of the image.
VERT. POSITION ....................Use to adjust the vertical position of the image.
FINE SYNC. ............................Use to synchronize the projector with the PC input
signal so that the image is not blurred.
TRACKING .............................Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ................The projector adjusts its settings automatically
when connected to a DVD player equipped with
a component video output (Y, C
B, CR). When the
projector is connected with a device having an
RGB terminal, choose RGB manually.
SET UP ...................................When OFF is selected, the black area becomes
make lighter. When 3.5% or 7.5% is selected, the
black area becomes thicker.
HOLD .....................................Use to adjust the image when fl agging occurs near the top of the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH ......................Use to correct solid white or solid black in the
projected image.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
FEATURE
XGA60
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
RESET ALL
English
LANGUAGE
A
Ë
OK
MENU ACCESS
PASSWORD
FUNCTION
ANAMORPHIC
CINEMA MODE
AUTO
1.
ON
CLAMP
POSITION
USER
0
CLAMP WIDTH 1
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
XGA60
opt.
OK
ON
HOLD
7.5%
SET UP