Mitsubishi Electronics XD70U Projector User Manual


 
E-14
The Procedure Up to Projecting to the Screen
Perform setup adjustments in the following order.
1 Position the projector
Determine the locations to set up the screen and the projector.
See Placement Guide on Page E-15.
2 Connect the video equipment and personal computer
Connect your equipment to the projector.
When making connections with the personal computers RGB connector, see Connections with
Personal Computer on Page E-16.
When making connections with the video equipments video connector or an S-video connector,
see Connections with Composite Signals on Page E-18.
When making connections with the video equipments YCbCr connector or YPbPr connector,
see Connections with Component Signals on Page E-19.
When playing the audio through the built-in speaker of the projector, see Connections with the
AUDIO Jack on Page E-20.
4 Connecting the power cable and switching on the power
See Operating on Page E-21.
See Finishing on Page E-23.
5
6
Switching on the power of the personal computer and video equipment
7 Properly adjust the projection image to the screen
See Adjustment of the Projection Screen on Page E-24.
8 Selecting input equipment
See Input Selection on Page E-26.
9 Adjust the screen or video image
Adjust the image to the optimum condition as required.
See the Table of Contents for the adjustment items.
About DLP projectors
Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may
be black spots or bright spots among the picture elements.
Note:
* Please purchase a screen.
* A component cable (Not supplied), which is available separately, is required to connect a DVD player or other equipment with YCbCr
connectors.
* A component cable (Not supplied), which is available separately, is required to connect high definition (HD) video equipment or other
equipment with YPbPr connectors.
3 Opening the lens cap
When selecting the language of menu displays, etc.
(Only when the power is first switched on following purchase)
See When [Menu Language Select] Is Displayed Upon Switching On the Power on Page E-22.