Mitsubishi Electronics XL5950LU Projector User Manual


 
EN 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
If the menu operation is not working, press the
RESET button on the terminal board using a suit-
able sharp object, push gently.
The settings with mark, you should press the
ENTER button after selecting.
Menu operation
IMAGE
XGA60
opt.
INSTALLATION
XGA60
opt.
ON
AUTO POWER
ON
OFF
AUTO POWER
OFF
OFF
ON
INSTALLATION
BLUE
BACK COLOR
XGA60
SPLASH SCREEN
opt.
AUTO POWER
ON
OFF
AUTO POWER
OFF
OFF
AUTO POWER
ON
30 min
AUTO POWER
OFF
OFF
IMAGE CONTRAST ± 30
BRIGHTNESS
COLOR MATRIX
± 30
sRGB ON , OFF
STANDARD
HIGH
LOW
USER
COLOR TEMP.
COLOR ± 10
TINT ± 10
SHARPNESS ± 10
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
± 30
EXPAND MODE 1 - 4
FRAME POSI. 1 - 5
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON
ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
FEATURE MENU POSITION 1 (Upper left), 2(Lower right)
LENS SHIFT USER
SPLASH SCREEN
BLACK, LOGOMUTE MODE
BLUE, LOGO, BLACKBACK COLOR
STANDARD, LOWLAMP MODE
OFF, CENTER, UPPER, LOWER ANAMORPHIC
ON , OFF3D CineView
ON , OFFSCART INPUT
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE
, English, Español, Deutsch, Français, Italiano, , , ,
VIDEO
YELLOW ± 30
RED ± 30
BLUE ± 30
CYAN ± 30
GREEN ± 30
MAGENTA ± 30
SATURATION ± 5
RGB-TINT ± 15
COMPUTER
USER
OFF
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION
0 - +63
CLAMP WIDTH 1 - 63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
SHUTTER(L)
0 - 383
SHUTTER(U)
0 - 383
SHUTTER(RS)
0 - 510
SHUTTER(LS)
0 - 510
VERT. SYNC.
AUTO, ON, OFF
MEMORIZE
*5
*3
*3
*4
*3
*3
*3
*3
*3
*3
*3
*5
*5
HOLD AUTO
USER1
,
USER2
DELETE
USER1
,
USER2
DEFAULT
ON
BEGIN -1 - -99
END 1 - 99
LOCK ON, OFF
RESET OK
OFF
COMPUTER INPUT
RGB, YC
B
C
R
/ YP
B
P
R
*5
*5
*5
*5
OFF, 5, 10, 15, 30, 60 min
(The item can not be selected when
the source is selected to COMPUTER)
*1
*1
*2
* 1: The item can not be selected when the sRGB is set to ON.
* 2: The item can not be selected with certain signals.
* 3: The item can not be selected when the selected source
is VIDEO or S-VIDEO.
* 4: The item can be selected only when the selected source
is VIDEO or S-VIDEO or the inputted signal is TV50 or TV60.
* 5: Setting range is different with certain signals.