Mitsubishi Electronics XL5950LU Projector User Manual


 
EN – 7
ENGLISH
Bottom side
1
2
3
1 Adjustment foot (Left/Right)
2 Air inlet grille/Filter cover
3 Lamp cover
Caution:
Do not replace the lamp immediately after using the
projector because the lamp has got extremely hot.
COMPUTER
VIDEO
KEYSTONE
VOLUME
LASER
EXPAND
MENU R-CLICK ENTER
P in P
STILL
MUTE
LENS SHIFT
16 : 9
1
2
1
2
ZOOM/FOCUS AUTOPOSITION
1
2
4
5
6
7
8
9
10
11
12
13
3
23
22
21
24
20
19
18
17
16
15
14
Remote control
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 POWER button
6 KEYSTONE button
7 ZOOM/FOCUS button
8 + , (VOLUME) buttons
9 Mouse pointer
10 MENU button
1 1 STILL button
12 PinP button
13 LENS SHIFT button
14 MUTE button (Audio/Video)
15 16 : 9 button
16 ENTER button
17 R-CLICK button (For mouse)
18
Direction buttons
19 LASER button
20 AUTO POSITION button
21 EXPAND button
22 VIDEO 1, 2 button
23 COMPUTER 1, 2 button
24 Left click button (For mouse)
The + and - buttons are used in the KEYSTONE and
ZOOM/FOCUS adjustment and the EXPAND mode in
addition to the volume control.
Pressing the LASER button emits a laser beam. Even when
you keep holding down the LASER button, it is emitted
only one minute. To keep emitting it longer, press the
LASER button again.
You can disable the LASER button to prevent laser
radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the }
button three times.
How to enable the LASER button
While holding the LASER button down, press the {
button three times.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength
: 640-660 nm)
Beam Divergence : 6m distance about 10.0mm x 10.0mm (±6.0mm)
CAUTION :
Pressing the LASER button on the remote control emits a laser beam. Do not
look into the laser beam directly. Do not point the laser beam at anyone.
Looking at the laser beam directly may damage eyesight.
Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
MADE IN CHINA
MANUFACTURER : B
MANUFACTURED
RAYONNMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
APPAREIL A LASER DE CLASSE2
LASER-STRAHLING
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
RADIZION LASER
NON GUARDARE NEL RAGGIO LUCE
APPARECCHIO LASER DI CLASSE 2
WAVE LENGTH :640-660nm MAX OUTPUT:1mW
IEC 60825-1:1993+A1:1997+A2:2001
INTERLINK K.K.
SHINODA BLDG 1-10-7 HIGASHIKANDA CHIYODA-KU,TOKYO 101-0031,JAPAN
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH
:
640-660nm
MAX OUTPUT
:
1mW
CLASS 2 LASER
PRODUCT
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM
THIS
APERTURE
CAUTION
Comp l ies with 21 CFR, 1040. 10 and 1040. 11
JANUARY
2003
S
RADIAÇÃO LASER
EVITAR A EXPOSIÇÃO AO FEIXE
APARELHO LASER DA CLASSE 2
POTÊNCIA MÁXIMA: 1mW
COMPRIMENTO DE ONDA: 640 - 660 nm