Mitsubishi Electronics SD105U Projector User Manual


 
EN-27
ENGLISH
Specifications
The specifications and outside appearance of the projector are subject to change without prior notice.
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that
came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : +1- (650) 572-2700 Fax : +1- (650) 572-9675
Type DLP™ DATA projector
Model SD105U
Rated power supply 100 - 240 V AC, 50 / 60 Hz
Rated input 2.6 A
Display Technology
0.55-inch Single chip Digital Micromirror Device (DMD) with R,G,B,W color wheel
Pixels 800 x 600 = 480000 pixels
Colors 16770000 colors
Projection lens F 2.5 (Wide), f = 19.9 - 21.4 mm
Light source lamp 160 W
Picture size 40 - 300 inch (Wide), aspect ratio 4:3
PC compatibility
Resolution:640x400 (Expand) - 800x600 (Real) - 1024x768 (Compress)
Sync on Green available
Video compatibility
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
Component Video (DVD/HDTV) (480l, 576l, 480P, 576P, 1080l, 720P)
Speaker 2 W Mono, Round type ø2.5 cm x 1
S-video input
Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
Video input 1.0 Vp-p 75 Ω (negative sync.)
Audio input 350 mVrms, 10 kΩ or more
Analog RGB input
RGB: 0.7 Vp-p 75 Ω (negative sync.)
YPBPR/YCBCR : Y:1.0 Vp-p (negative sync.) PBPR/CBCR:0.7 Vp-p
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
Control connector
Serial terminal (RS-232C) (D-SUB 9-pin)
USB terminal (for Page Up/Down)
Outside dimensions 256 x 102 x 223 mm (width x height x depth)
Weight Approx. 2.9 kg
Length of power cord 71 inch (1.8 m)
Temperature, humidity
(performance guaranteed)
+41ºF (+5ºC) - +95ºF (+35ºC), 30 - 90%