Filter
Top Products
8
Function
ITEM
Character ASCII
Data
Audio Input AUDIO 41h 55h 44h 49h 4Fh 0 (Auto), 1 (Audio1), 2 (Audio2), 3 (Audio3), 4 (Mix)
Lamp Mode LM 4Ch 4Dh 0 (Standard), 1 (Low)
Standby Mode STBY 53h 54h 42h 59h 0 (LAN), 1 (Low), 2 (Speaker Out), 3 (Monitor Out)
Menu Position MP 4Dh 50h 0 (Upper Left), 1 (Upper Right), 2 (Center),
3 (Lower Left), 4 (Lower Right)
Image Reverse IR 49h 52h 0 (Off), 1 (Mirror), 2 (Invert), 3 (Mirror Invert)
Auto Keystone AKS 41h 4Bh 53h 0 (Off), 1 (On)
Test Pattern TP 54h 50h 0 (Off), 1 (Cross Hatch), 2 (White), 3 (Black)
Language LG 4Ch 47h 00:Japanese, 01:English, 02:Spanish,
03:Germany, 04:French, 05:Italian, 06:Chinese,
07:Korean, 08:Russian, 09:Portuguese,
11:Swedish , 12:Polish, 13:Hungarian, 18:Arabic,
19:Turkish, 20:Thai, 21:Indonesian, 22:Malay
Reset All RSTALL 52h 53h 54h 41h 4Ch 4Ch
Password Lock
PSLOCK****
50h 53h 4Ch 4Fh 43h 4Bh **** is a 4-digit password comprised of any figures
1 to 4.
Video Signal
(VIDEO only)
VS 56h 53h 0 (Auto), 1 (NTSC), 2 (PAL), 3 (SECAM),
4 (4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
Closed Caption CC 43h 43h 0 (Off), 1 (CC1), 2 (CC2), 3 (CC3), 4 (CC4),
5 (T1), 6 (T2)
Some commands are not executed depending on the input signal. The operational restrictions same as those on
the menu setting are applied. Refer to “Menu operation” in the User Manual for more details. How to set the value.
How to set the value
Use the character or ASCII code as shown below to set the value.
Character
＋ －
0 1 2 3 4 5 6 7 8 9
ASCII ‘2Bh’ ‘2Dh’ ‘30h’ ‘31h’ ‘32h’ ‘33h’ ‘34h’ ‘35h’ ‘36h’ ‘37h’ ‘38h’ ‘39h’
[Example 1] When setting the Contrast to +10. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘50’ ‘50’ ‘2B’ ‘31’ ‘30’ ‘0D’
00PP+10
Command for setting the picture
control
‘30’ ‘30’ ‘50’ ‘50h’ ‘2B’ ‘31’ ‘30’ ‘0D’
00PP+10
Command receipt confirmation
(Command echo back)
[Example 2] When setting the 3D to Side by Side. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘54’ ‘44’ ‘4D’ ‘32’ ‘0D’
00TDM2
Command for setting the 3D
to Side by Side
‘30’ ‘30’ ‘41’ ‘50’ ‘4F’ ‘4E’ ‘31’ ‘0D’
00TDM2
Command receipt confirmation
(Command echo back)
[Example 3] When checking the TINT setting (when the TINT is set to +10). (Values enclosed in quotation marks
are ASCII codes.):
Command sent from the PC, etc.
Status code returned
from the projector
Description
‘30’ ‘30’ ‘53’ ‘0D’
00S
Command for checking the
TINT setting
‘30’ ‘30’ ‘53’ ‘2B’ ‘31’ ‘30’ ‘0D’
00S+10
Check result (+10)