Mitsubishi Electronics WD2000 Projector User Manual


 
EN-23
ENGLISH
IMAGE
opt.
CONTRAST
BRIGHTNESS
0
0
STANDARD
0
0
0
COLOR
TINT
SHARPNESS
COLOR TEMP.
AUTO
COLOR
ENHANCER
XGA60
INSTALLATION
opt.
ON
SPLASH
SCREEN
AUTO POWER
OFF
BACK COLOR
LAMP MODE
OFF
OFF
ON
BLUE
AUTO POWER
ON
STANDARD
OFF
IMAGE
REVERSE
XGA60
TEST PATTERN
CROSS HATCH
ZOOM/FOCUS
LOCK
OFF
OFF
LENS SHIFT LOCK
LENS SHIFT
RESET
OK
FEATURE
AUTO
XGA60
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY INPUT
PASSWORD
FUNCTION
CINEMA MODE
AUTO
1.
SET UP
AUTO
WXGA
AUTO
OFF
WXGA
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT.POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
opt.
OK
OFF
HOLD
XGA60
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu 2. INSTALLATION menu 3. FEATURE menu 4. SIGNAL menu
1. IMAGE menu
ITEM SETTING FUNCTION
COLOR ENHANCER AUTO Select to optimize the settings automatically depending on the input signal.
(Select this option for normal use.)
PRESENTATION
Select to make the displayed image look bright and crisp.
STANDARD Select to make the displayed image look natural.
THEATER This option, suitable for viewing movies, makes the displayed image look soft
and smooth.
sRGB Select to give priority to the color reproducibility.
When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can’t
be adjusted.
USER Select to set the gamma curve and BrilliantColor
TM
as desired. (See page 26.)
CONTRAST
±
30 Use to adjust the contrast of the projected image. (See page 25.)
BRIGHTNESS
±
30 Use to adjust the brightness of the projected image. (See page 25.)
COLOR TEMP.
4 options Use to adjust the color temperature. (See page 26.)
COLOR
±
10 Use to adjust the color thickness of the projected image. (See page 25.)
TINT
±
10 Use to adjust the color tint of the projected image. (See page 25.)
When the TV50 (PAL, SECAM) signal is input, TINT can’t be adjusted.
SHARPNESS
±
5 Use to adjust the sharpness of the projected image. (See page 25.)
2. INSTALLATION menu
ITEM SETTING FUNCTION
LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.
LOW Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
When the lamp mode is switched, the projected image may fl icker. This is
not a product malfunction.
Frequent switching of the lamp mode may damage the lamp.
AUTO POWER ON ON / OFF
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
The projector is in the stand-by mode when the lamp is off. Use the remote
control to turn on the lamp.
AUTO POWER OFF OFF / 5 - 60min
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
SPLASH SCREEN
ON / OFF Choose ON to display the splash screen when the power is turned on.
BACK COLOR BLUE / BLACK
Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE
OFF Select when viewing images from the front with the projector installed on the
oor.
MIRROR Select when viewing images projected from the behind of the screen with the
projector installed on the fl oor.
INVERT Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
MIRROR INVERT Select when viewing images from the front with the projector installed on the
ceiling.
TEST PATTERN CROSS HATCH Use to show the test pattern of the crossing hatch.
ZOOM/FOCUS LOCK
ON / OFF Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK
ON / OFF Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET
OK Use to reset the position of the lens to the factory setting.
Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
To cancel the test pattern, press any button.