EN-44
Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Replacement part (option/not included in the box)
Spare lamp: VLT-XL650LP
Option lenses: OL-XL2550MZ, OL-XL2550LZ, OL-XL2550TZ
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum
resolution
Computer signal
Video signal
Component
signal
Computer/Component video input
Video input
Audio input
Monitor output
Audio output
Speaker
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others
S-video input
Video input
Component video
input
Analog input
Digital input (DVI)
Audio input
LCD projector
WL2650U
0.75-inch LCD panel: 3 pieces (for R,G,B)
Pixel: 1280 x 800 = 1024000 pixels Total 3072000 pixels
Active pixel rate: 99.99% or more (each panel)
F 1.7 - 1.9 f= 24 - 29 mm
261 W
40” min. to 300” max. (Projection distance 1.2 to 9.6 m)
Maximum resolution: 1600 x 1200 dots (Analog)/compressed
Panel resolution: 1280 x 800 dots
NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1280 x 800 dots
[Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 2
Digital RGB DVI-D 1
[Signal type] [Terminal type] [Line]
Video input RCA 1
S-Video input S 1
[Signal type] [Terminal type] [Line]
RGB Stereo mini jack (ø3.5) 2
Video RCA (L, R) 1
S-video RCA (L, R) 1
[Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
[Signal type] [Terminal type] [Line]
RGB/Video/S-video Stereo mini jack (ø3.5) 1
3 W Mono Round type ø4.5 cm
x
1
RS-232C (D-SUB 9-pin), USB terminal, LAN terminal (RJ-45)
+41°F (+5°C) to +95°F (+35°C)
AC100 - 240 V, 50/60 Hz
3.9 A
333 mm (W) x 113 mm (H) x 272 mm (D) * Not including protrusion.
4.7 kg
Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Vp-p=1.0 V 75 Ω (negative sync)
YC
BCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (CB, CR)
RGB: Vp-p=0.7 V 75 Ω
YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
DVI-D interface (TMDS single link) with HDCP
350 mVrms, 10 kΩ or more