Mitsubishi Electronics XD1000 Projector User Manual


 
EN-8
1
2
Preparating your projector (continued)
Bottom side
1 Lamp cover
2 Adjustment feet
Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot
and it may cause burns.
Remote control
1 Laser aperture
2 Transmission window
3 Wired remote control jack
4 Indicator
5 POWER button
6 VIDEO button
7 DVI-D(HDCP) button
8 HOME button
9 END button
10 Mouse pointer
11 LENS SHIFT button
12 MENU button
13 ZOOM/FOCUS button
14 + , - (VOLUME) buttons
15 COLOR ENHANCER (CE) button
16 MUTE button (Audio/Video)
17 EXPAND button
18 STILL button
19 PinP button
20 ASPECT button
21 KEYSTONE button
22 ENTER button
23 R-CLICK button
24 Direction buttons
25 LASER button
26 AUTO POSITION button
27 Page Up/Down buttons
28 S-VIDEO button
29 COMPUTER 1, 2 buttons
30 Left click button
The + and - buttons are used in the KEYSTONE adjustment and the EXPAND mode in addition to the volume con-
trol.
The direction buttons are also used for keystone and lens shift adjustments. The
and
buttons are also used
for adjustment of the sub image display position in the PinP mode and zoom/focus adjustment.
Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER button, it is emitted
only one minute. To keep emitting it longer, press the LASER button again.
You can disable the LASER button to prevent laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the button 3 times.
How to enable the LASER button
While holding the LASER button down, press the button 3 times.
Whenever the batteries are replaced, the LASER button is enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength : 620-640 nm)
Beam Divergence : 6 m distance about 10.0 mm x 10.0 mm (±6.0 mm)
CAUTION :
Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do
not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
Use of controls or adjustments or procedures other than those specifi ed herein may result in hazardous radiation exposure.
This remote controller cannot be repaired.
30
COMPUTER
VIDEO S-VIDEO
DVI-D(HDCP)
HOME Page Up
END Page Down
AUTO POSITION
KEYSTONE
ASPECT
PinP
STILL
EXPAND
MUTE
LENS SHIFTZOOM / FOCUS
1
2
VOLUME
4
5
6
7
8
9
10
11
12
13
29
28
27
26
25
24
23
22
21
19
20
18
16
14
15
17
CE
MENU
ENTER
LASER
R-CLICK
1
2
3