Filter
Top Products
EN-17
ENGLISH
3 FEATURE
MENU POSITION .......................Use to select the position of the menu on the screen,
1. (upper left) or 2. (lower right).
CINEMA MOD.............................When AUTO is selected, the film mode will be auto-
matically activated when a film source signal is input-
ted. When OFF is selected, the film mode will not be
activated.
VIDEO SIGNAL........................... When AUTO is selected, the appropriate video format
is automatically selected depending on the input sig-
nal. If the image isn’t displayed correctly, select the
desired video format manually.
ANAMORPHIC............................ Select ON when playing DVD discs containing data of
widescreen images.
PASSWORD FUNCTION
.............. Use to change the mode of the password lock or to enable or cancel the password lock. See
page 21 for details.
LANGUAGE ................................ Use to select the language used in the menu. ( / English / Español / Deutsch / Français /
Italiano / / / / PORTUGUÊS).
RESET ALL.................................Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.
• When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIG-
NAL depending on the input signal in such cases.
4 SIGNAL
HORIZ. POSITION......................Use to adjust the horizontal position of the image.
VERT. POSITION........................Use to adjust the vertical position of the image.
FINE SYNC.................................Use to synchronize the projector with the PC input
signal so that the image is not blurred.
TRACKING..................................Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ...................The projector adjusts its settings automatically when
connected to a DVD player equipped with a compo-
nent video output (Y, C
B
, C
R
). When the projector is
connected with a device having an RGB terminal,
choose RGB manually.
SET UP .......................................When OFF is selected, the black area becomes make
lighter. When 3.5% or 7.5% is selected, the black
area becomes thicker.
HOLD .........................................Use to adjust the image when flagging occurs near the top of the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH...........................Use to correct solid white or solid black in the pro-
jected image.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
FEATURE
XGA60
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
RESET ALL
English
LANGUAGE
A
Ë
OK
MENU ACCESS
PASSWORD
FUNCTION
ANAMORPHIC
CINEMA MODE
AUTO
1.
ON
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
XGA60
opt.
OK
ON
HOLD
7.5%
SET UP
CLAMP
POSITION
USER
0
CLAMP WIDTH 1