Mitsubishi Electronics XD2000 Projector User Manual


 
EN-12
Screen size and projection distance
Refer to the following table to determine the screen size.
When the aspect ratio of the screen is 4:3
Screen size
Projected distance (L) Lens movable range
4:3 Diagonal size Height (H) Width (W) Min. Max. (H1) (H2) width (W1)
inch cm inch cm inch cm inch m inch m inch cm inch cm inch cm
The above fi gures are approximate and may be slightly different from the actual measurements.
The lens movable range shows distances from the factory default position.
LENS SHIFT button
To adjust the positions of the projector and the screen, use LENS SHIFT button.
1. Press the LENS SHIFT button.
2. Press the , , or button to move the image position.
Every time the button is pressed, the image moves down.
Every time the button is pressed, the image moves up.
Every time the button is pressed, the image moves to the right.
Every time the button is pressed, the image moves to the left.
When you hold down these buttons for 2 seconds or longer, the displayed image moves fast in the corresponding
directions.
Be careful not to be caught in the opening in the lens while the lens is moving.
Setting up your projector (continued)
40 102 24 61 32 81 54 1.4 74 1.9 12 30 2 6 3 8
60 152 36 91 48 122 82 2.1 112 2.8 18 46 3 9 5 12
80 203 48 122 64 163 110 2.8 150 3.8 24 61 4 11 6 16
100 254 60 152 80 203 138 3.5 189 4.8 30 76 6 14 8 20
150 381 90 229 120 305 208 5.3 284 7.2 45 114 8 21 12 30
200 508 120 305 160 406 279 7.1 380 9.7 60 152 11 28 16 41
250 635 150 381 200 508 349 8.9 476 12.1 75 191 14 36 20 51
300 762 180 457 240 610 419 10.6 571 14.5 90 229 17 43 24 61
L
L
W1W1
H1 H2
H
W
L
L
W1W1
H1H2
H
W
Front projection Front projection, ceiling mounting