Filter
Top Products
EN-17
ENGLISH
3 FEATURE
MENU POSITION ...................................... Use to select the position of the menu on the screen, 1.
(upper left) or 2. (lower right).
CINEMA MODE ......................................... When AUTO is selected, the film mode will be automati-
cally activated when a film source signal is inputted.
When OFF is selected, the film mode will not be acti-
vated.
VIDEO SIGNAL.......................................... When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If
the image isn’t displayed correctly, select the desired
video format manually.
ANAMORPHIC........................................... Select ON when playing DVD discs containing data of
widescreen images.
WXGA........................................................ See "Specifications" for details of the signal types that
you can project correctly.
Select OFF when the signal is 1280 x 800. (note ; Factory Preset is "OFF")
Select the image size corresponding to the input signal when the input signal is 1280x768, 1360x768,
or 1366x768
NOTE:
• Make sure the image size of the input signal from "Display Property" of your computer.
• It takes approx. 8 to 10 seconds to change the settings. You cannot change the settings during that time.
PASSWORD FUNCTION
............................. Use to change the mode of the password lock or to enable or cancel the password lock. See page 21
for details.
LANGUAGE ............................................... Use to select the language used in the menu. ( / English / Español / Deutsch / Français / Ital-
iano / / / / PORTUGUÊS).
RESET ALL................................................ Use to reset the menu settings (except PASSWORD FUNCTION, and LANGUAGE ).
• CINEMA MODE can be adjusted only when a TV50, TV60, 480i, 576i signal is being displayed.
• When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the setting of VIDEO SIGNAL depend-
ing on the input signal in such cases.
4SIGNAL
HORIZ. POSITION..................................... Use to adjust the horizontal position of the image.
VERT. POSITION....................................... Use to adjust the vertical position of the image.
FINE SYNC. .............................................. Use to synchronize the projector with the PC input signal
so that the image is not blurred.
TRACKING................................................. Use to eliminate image noise such as wide stripes.
COMPUTER INPUT .................................. The projector adjusts its settings automatically when
connected to a DVD player equipped with a component
video output (Y, C
B, CR). When the projector is con-
nected with a device having an RGB terminal, choose
RGB manually.
SET UP...................................................... When OFF is selected, the black area becomes make
lighter. When 3.75% or 7.5% is selected, the black area
becomes thicker.
HOLD ........................................................ Use to adjust the image when flagging occurs near the top of the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH.......................................... Use to correct solid white or solid black in the projected
image.
Important:
• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
FEATURE
XGA60
AUTO
opt.
MENU POSITION
VIDEO SIGNAL
?
RESET ALL
English
LANGUAGE
A
Ë
OK
PASSWORD
FUNCTION
MENU
ACCESS
ANAMORPHIC
CINEMA MODE
AUTO
1.
OFF
WXGA
OFF
WXGA
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
XGA60
opt.
OK
ON
HOLD
7.5%
SET UP
CLAMP
POSITION
USER
0
CLAMP WIDTH 1