Mitsubishi Electronics XL2U Projector User Manual


 
EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or } button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
If the menu operation is not working, press the
RESET button on the terminal board using a suit-
able sharp object, push gently.
The settings with mark, you should press the
ENTER button after selecting.
Menu operation
IMAGE
XGA60
opt.
INSTALLATION
XGA60
opt.
AUTO POWER
ON
OFF
RIS OFF
INSTALLATION
XGA60
opt.
KEYSTONE 0
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
30 min
AUTO POWER
ON
OFF
AUTO POWER
OFF
IMAGE CONTRAST ± 30
BRIGHTNESS ± 30
sRGB ON, OFF
VIDEO
COLOR MATRIX
COLOR ± 10
TINT ± 10
SHARPNESS ± 10
RED ± 30
CYAN ± 30
GREEN ± 30
YELLOW ± 30
BLUE ± 30
MAGENTA
SATURATION
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
(The item can not be selected when
the source is selected to COMPUTER)
± 30
± 5
RGB-TINT ± 20
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
EXPAND MODE 1 - 4
1=Upper left, 2=Lower right
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
RIS
AUTO POWER ON ON, OFF
KEYSTONE -20 - +30
ON, OFF
AUTO POWER OFF
COMPUTER, VIDEO, COMPUTER VIDEO, MUTE
OFF, CENTER, UPPER, LOWER
FEATURE MENU POSITION
OFF, 5, 10, 15, 30, 60 min
SPLASH SCREEN
BACK COLOR
STANDARD, LOWLAMP MODE
VIDEO SIGNAL
AUDIO MODE
ON, OFF
ANAMORPHIC
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
RESET ALL
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION
0 - +63
CLAMP WIDTH
1 - 63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
SHUTTER (L)
0 - 383
0 - 510
0 - 510
SHUTTER (U)
0 - 383
VERT. SYNC
AUTO, ON, OFF
COMPUTER
USER
OFF
STANDARD
HIGH
LOW
COLOR TEMP.
USER
MEMORIZE
*6
*6
*3
*4
*5
*4
*4
*4
*4
*4
*4
*4
*4
*1
*1
*1
*2
*6
HOLD AUTO
USER1
,
USER2
DELETE
USER1
,
USER2
DEFAULT
ON
OK
BEGIN -1 - -99
END 1 - 99
OFF
COMPUTER INPUT
RGB, YC
B
C
R
/ YP
B
P
R
*6
*6
*6
*6
, English, Español, Deutsch, Français, Italiano,
SHUTTER(RS)
SHUTTER(LS)
1, 2, 3, OFF
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
BLUE, LOGO, BLACK
BLACK, LOGO
MUTE MODE
FRAME POSI. 1 - 5
SCART INPUT
3D CineView
ON, OFF
* 1: The item can not be selected when the sRGB is set to ON.
* 2: The item can not be selected with certain signals.
* 3: The allowable range of the adjustment value in the
keystone adjustment will vary depending on the
installation conditions.
* 4: The item can not be selected when the source is selected
VIDEO or S-VIDEO.
* 5: The item can be selected only when the selected source is
VIDEO or S-VIDEO or the inputted signal is TV50 or TV60.
* 6: Setting range is different with certain signals.
,, ,