Mitsubishi Electronics XL6U Projector User Manual


 
EN 17
ENGLISH
3 FEATURE
MENU POSITION ...
Use to select the position of the menu on the screen, 1.
(upper left) or 2. (lower right).
EXPAND MODE .. Choose the mode for enlarging the image. See page 20.
AUDIO MODE ..... Select COMPUTER to output the audio that is input to the
AUDIO IN terminal when COMPUTER is chosen as the
source. Select VIDEO to output the audio that is input to that
terminal when VIDEO is chosen as the source. Select
COMPUTER VIDEO mode to always output the audio that is
input to that terminal. Select MUTE not to output the audio at
all.
CINEMA MODE .. When AUTO is selected, the film mode will be automatically
activated when a film source signal is input. When OFF is
selected, the film mode will not be activated.
VIDEO SIGNAL ... When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the
image isnt displayed correctly, select the desired video format manually.
SCART INPUT ..... Choose ON when connecting the projector with a device equipped with the SCART terminal that
can output RGB signal. SCART terminal is used mainly in Europe. Choose OFF normally.
ANAMORPHIC .... Select the desired position from among UPPER, CENTER, and LOWER when playing DVD discs
containing data of letterboxed images.
PASSWORD FUNCTION .
Use to change the mode of the password lock or to enable or cancel the password lock. See page 22
for details.
LANGUAGE ........ Use to select the language used in the menu. ( / English / Español / Deutsch / Français /
Italiano / / / / )
RESET ALL ......... Use to reset the menu settings (except IMAGE CAPTURE, PASSWORD, and LANGUAGE ).
CINEMA MODE can be adjusted only when a TV60 or 480i signal is being displayed.
When SCART INPUT is set to ON, nothing is output to the external monitor.
When SCART INPUT is set to ON, normal computer signals arent projected.
Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV
device equipped with the SCART terminal.
Some AV devices equipped with the SCART terminal arent compatible with this projector.
When VIDEO SIGNAL is set to AUTO, the image may not be projected with correct colors. Change the
setting of VIDEO SIGNAL depending on the input signal in such cases.
When ANAMORPHIC is set to except OFF, the keystone adjustment ranges are limited.
4 SIGNAL
HORIZ. POSITION ...
Use to adjust the horizontal position of the image.
VERT. POSITION ...
Use to adjust the vertical position of the image.
FINE SYNC. ......... Use to synchronize the projector with the PC input signal so
that the image is not blurred.
TRACKING .......... Use to eliminate image noise such as wide stripes.
COMPUTER INPUT ...
The projector adjusts its settings automatically when
connected to a DVD player equipped with a component video
output (Y, CB, CR). When the projector is connected with a
device having an RGB terminal, choose RGB manually.
HOLD .................. Use to adjust the image when flagging occurs near the top of
the screen.
5 SIGNAL - USER (No need to adjust in normal use.)
CLAMP POSITION/
CLAMP WIDTH ... Use to correct solid white or solid black in the projected image.
VERT.SYNC. ........ Use to adjust the image when its motion doesnt run smoothly.
Select AUTO for normal use.
SHUTTER (U) ...... Use to adjust the image when noise appears on the top part of the
image.
SHUTTER (L) ...... Use to adjust the image when noise appears on the bottom part of
the image.
SHUTTER (LS) .... Use to adjust the image when noise appears on the left half of the
image.
SHUTTER (RS) .... Use to adjust the image when noise appears on the right half of
the image.
If any setting of the SIGNAL-USER menu is changed, the image may not be displayed correctly. In this
case, press the AUTO POSITION button.
Important:
You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.
TV60 and TV50 are equivalent to 480i and 576i respectively. Settings made for one of them apply
automatically when its counterpart is supplied.
FEATURE
OFF
OFF
XGA60
AUTO
EXPAND
opt.
MENU POSITION
EXPAND MODE
A
A
VIDEO SIGNAL
?
ANAMORPHIC
RESET ALL
English
LANGUAGE
A
Ë
OK
SCART INPUT
DISPLAY
INPUT
PASSWORD
FUNCTION
CINEMA MODE
AUTO
AUDIO MODE
COMPUTER
VIDEO
1.
CLAMP
POSITION
SIGNAL-USER
0
CLAMP WIDTH 1
SHUTTER (U) 0
SHUTTER (L) 0
SHUTTER (LS) 0
SHUTTER (RS) 0
VERT. SYNC. AUTO
?
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
FINE SYNC. 0
USER
XGA60
opt.
OK
ON
HOLD