Mitsubishi Electronics XL6U Projector User Manual


 
EN 10
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal
computer that have analog RGB output connectors.
Important:
Make sure that the connected device is turned off before starting connection.
Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the
plug. Do not pull the cord.
When the projector and the connected devices are located too close to each other, the projected image may be
affected by their interference.
See the owners guide of each device for details about its connections.
Projector + AV device
Important:
Match the colors of the video and audio plugs on the AV cable with those of the terminals.
Speaker output is mono.
Set AUDIO MODE in the FEATURE menu to VIDEO to hear the audio only when the input source is VIDEO.
(See page 17.)
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with
this projector, use the COMPUTER/COMPONENT VIDEO IN terminal.
Important:
The terminals names Y, PB, and PR are given as examples of when a HDTV decoder is connected.
The terminals names vary depending on the connected devices.
Use a Mini D-SUB 15P-BNC conversion cable for connection.
Image may not be projected correctly with some DVD players.
When connecting a HDTV decoder having RGB output terminals, set COMPUTER INPUT to RGB in the
SIGNAL menu.
Speaker output is mono.
S-VIDEO IN
VIDEO IN
AUDIO IN
VCR, etc
to video output
to audio output
to S-video output
B G R
C
B
(P
B
)Y C
R
(P
R
)
HD/CS VD
AUDIO IN
COMPUTER/COMPONENT
VIDEO IN
DVD player or HDTV decoder
to audio output
AUDIO cable (option)
BNC-RCA connector (option)
No connection
Mini D-SUB 15P-BNC
conversion cable (optional)