Filter
Top Products
1-8 Getting Started
3. Using the grommet provided, secure the strap into the
attaching hole.
4. Thread the strap through the slot and secure the
strap at the VELCRO tab. Make sure the strap is
adjusted to fit your hand.
5. Using the self-tapping Phillips screw provided, secure
the button to the strap grommet. The screw threads
itself while you tighten it.
Make sure the button is securely
fastened to the printer.
Do not over tighten the screw. You
may strip the threads.
Button
Self-tapping
Phillips screw