Filter
Top Products
NPort IA5150/5250 Series User’s Manual Introduction
1-3
Product Specifications
NPort IA5150-M-SC/5150I-M-SC/5150-S-SC/5150I-S-SC LAN
Fiber Port 1 100BaseFX port (SC connector)
NPort IA5150/5150I/5250 LAN
Ethernet Switch Ports 2 10/100BaseT(X) ports (RJ45 connector)
Protection Built-in 1.5 KV magnetic isolation
Optical Fiber
Distance Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km)
Min. TX Output Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm
Max. TX Output Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm
Sensitivity -36 to -32 dBm (Single), -34 to -30 dBm (Multi)
NPort IA5150 Series Serial Interface
Interface RS-232/422/485
No. of Ports 1
Port Type Male DB9 for RS-232;
5-pin terminal block for RS-422/485
Signals RS-232: TxD, RxD, RTS, CTS, GND, DTR, DSR,
DCD
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
RS-485 Data Direction Patented ADDC™ (Automatic Data Direction Control)
Isolation 2 KV (5150I/5150I-M-SC/5150I-S-SC)
Serial Line Protection 15 KV ESD for all signals
NPort IA5250 Serial Interface
Interface RS-232/422/485
No. of Ports 2
Port Type Male DB9
Signals RS-232: TxD, RxD, RTS, CTS, GND, DTR, DSR,
DCD
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
RS-485 Data Direction Patented ADDC™ (Automatic Data Direction Control)
Serial Line Protection 15 KV ESD for all signals